Dr. Leonard Hess, DDS

Dr. Leonard Hess, DDS

Dr. Leonard Hess began teaching continuing education courses in 2005, and the topics include occlusion, smile design, treatment planning, preparation design, and practice integration of complete dentistry.

He’s taught full-day continuing education courses at the American Academy of Cosmetic Dentistry’s national meeting, The Greater New York Dental Meeting, AACD National Meeting, Pacific Dental Conference, Ontario Dental Association meeting, and The Yankee Dental Conference.

Dr. Hess also has taught courses in Japan, Germany, Poland, China, and Canada.

Dr. Hess is currently serving as the Senior Clinical Director at The Dawson Academy. He also owns Union County Center for Comprehensive Dentistry in Charlotte, North Carolina.

dawson academy complete dental examinations

Complete Examinations in Dentistry

December 6, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyThe Article Originally Appeared on TheDawsonAcademy.com. Dr. Hess…

Read More
how to track key dental practice performance metrics

How To Track Key Dental Practice Performance Metrics

November 15, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyThe Article Originally Appeared on TheDawsonAcademy.com Measure What’s…

Read More
phone greeting tips for dental offices

Top Phone Greeting Tips for Dental Practices

October 25, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyThe Article Originally Appeared on TheDawsonAcademy.com In today’s…

Read More

How to Master a Complete Dental Examination

October 4, 2024 |

By: Dr. Leonard A. Hess, DDS, Clinical Director, The Dawson AcademyThis article originally appeared on TheDawsonAcademy.com, Dr….

Read More
How Do You Know If You Achieved Centric Relation? By: Dr. Leonard A. Hess, DDS Clinical Director, The Dawson Academy This article originally appeared on TheDawsonAcademy.com, Dr. Hess allowed igniteDDS to share with our readers. When we talk about utilizing bimanual manipulation as a way to get centric relation, one of the biggest misunderstandings we see is the tendency for dentists to think CR is achieved by forcing the jaw back to seat the condyles. When we are in a situation where we have a tight patient, or patients that are resisting, the worst thing we can do is force it. Bimanual manipulation provides verification of: The correctness of the physiologic position The alignment of the condyle-disk assembly The integrity of the articular surfaces Steps to Achieving Centric Relation Recline the patient so your arms are parallel to the floor and their chin is pointing up. Stabilize the patient’s head by cradling it between your rib cage and forearm. It is essential that the head be stabilized with a firm grip so it will not move when the mandible is being manipulated. Lift the patient’s chin to slightly stretch the neck, keeping your forearms parallel to the floor. Gently position the four fingers of each hand on the lower border of the mandible. The little finger should be slightly behind the angle of the mandible. The pads of your fingers should align with the bone and stay together as if you were going to lift the head. Bring the thumbs together to form a C with each hand. The thumbs should fit in the notch above the symphysis. Remember, NO PRESSURE should be applied. With a gentle touch, and with almost zero pressure from your hands, have the patient slowly hinge open and closed in rotation (an arc of 1-2mm is acceptable), never letting the teeth touch. Do not jiggle or load the joint at this point. The whole idea here is to let the condyles go to where they physiologically want to be – properly seated in each fossa. When the hinge movement is consistent, the mandible will retrude automatically and you should feel the jaw go back. At that point, hold the jaw firmly on that hinge point. With proper hand placement, there is a torque effect from the thumbs and fingers that loads the joints in an upward and forward direction. This allows upward pressure to be maintained through the condyles while still allowing them to rotate freely. Load the joint by applying firm (but gentle) pressure UP with the fingers on the back half of the mandible and DOWN with the thumbs in the notch above the symphysis (keeping the teeth separated). Note: Sudden heavy loading can injure retrodiskal tissue and cause considerable pain. Ask the patient, Do you feel any tension or tenderness in either joint? If yes, stop and determine the cause. If no, continue. Increase to moderate pressure, then firm pressure. With each increment of loading, ask the patient, “Do you feel ANY tension or tenderness in either joint?”. If tension or tenderness is experienced at any load interval, stop and determine the cause. The dense vascular connected tissue that makes up the disk will be able to handle enormous pressure through it without any sort of tenderness if you have a properly aligned condyle-disk assembly, and that condyle is completely seated. And if the condyle is seated completely, such that the medial aspect of the condyle is engaged with the medial aspect of the glenoid fossa with a properly inter-closed disk, then there can’t be any stretching of the muscle. What It Looks Like When the Condyle is Not Completely Seated in Centric When you load test, there will be a tension on that lateral pterygoid, and they will feel some tightness or fullness or a pull. Because of this feeling, they’ll have awareness in that joint. If there’s pathology in the joint or an intracapsular problem, they’re likely to have some sort of discomfort or tenderness. But also, remember that as we assess the joint, we’re relying on the totality of the exam; the questions that we ask, the palpation of the muscles, the load testing, the range of motion, doppler analysis, all these things that we do, to develop a visual picture of what’s going on there. But the short answer to, how do you know if you’ve achieved centric relation, is by load testing; by load testing in three pressure increments and making sure there is no tension or tenderness in either joint. If a Patient Has Had a Lower Block, You Can Still Put Them in Centric Relation Anesthesia locking the trigeminal nerve really doesn’t have any effect whatsoever on whether you can achieve centric or not. Those are sensory nerves and we’re not really messing with the motor. The fact is, we’re going to take bilateral manipulation to achieve centric relation, whether they’re numb or not. And the technique is going to be exactly the same. You can actually achieve centric relation even if the patient is asleep. We’ve done a number of bite records while the patients were under Pentathol. It’s exactly the same as when they’re awake. Just remember, when you’re putting a patient in centric relation, it’s the natural physiological hinge of the joint you’re looking for. If you’ve previously taken Core 2: Examination & Records with us, I encourage you to review all the principles in the book (Chapter 9: Determining Centric Relation) and in the manual, as well as what we taught in class. If you haven’t taken the Examination & Records course, we spend a day and a half doing load testing, so that students get very comfortable with the hand position and how to get repeatable precise results.

How Do You Know If You Achieved Centric Relation?

August 23, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyThis article originally appeared on TheDawsonAcademy.com, Dr. Hess…

Read More
tmj patient

TMJ 101: The Best TMD Treatment Options For Dentists

July 12, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyThis article originally appeared on TheDawsonAcademy.com, Dr. Hess…

Read More
dentist checking patient for fremitus

What is Fremitus and Why Should You Check For It?

June 21, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyThis article originally appeared on TheDawsonAcademy.com, Dr. Hess allowed igniteDDS to…

Read More
prepping second molars

Dentist Education: How Do I Predictably Prep Second Molars?

May 31, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyArticle originally appeared on TheDawsonAcademy.com, Dr. Hess allowed…

Read More
Sequencing a Full-Mouth Rehab: Anterior or Posteriors First?

Sequencing a Full-Mouth Rehab: Anterior or Posteriors First?

April 26, 2024 |

The correct sequence to begin a full-mouth rehab is tobegin with the anterior teeth first, particularly the…

Read More
patients who have more pain after wearing a b-splint

Q&A with Dr. Hess: Patients Who Have More Pain After Wearing a B-Splint

April 12, 2024 |

By: Dr. Leonard A. Hess, DDSClinical Director, The Dawson AcademyThe Article Originally Appeared on TheDawsonAcademy.com Question: What…

Read More

Dental Fuel Episode 1: Clinical Mistake with Dr. Tony Mennito

By Tanya Sue Maestas, DDS | April 21, 2023

On our first episode of Dental Fuel, we have Dr. Tony Mennito. Dr. Anthony Mennito (Tony) is a private practice dentist and an adjunct faculty member at the MUSC College of Dental Medicine in Charleston, South Carolina. His dental practice, Expertise Dental, focuses on using technology to comprehensively care for his patients while helping to…

But My Tooth Doesn’t Hurt!

By Chad Duplantis, D.D.S, F.A.G.D | April 20, 2023

By: Dr. Chad Duplantis, D.D.S., F.A.G.D

Dental Cement: When to Use & What to Use

By David Rice | April 17, 2023

By: Dr. David Rice Dental cement – with all our indirect material options today-understanding the decision tree from cast gold, to PFM, to Glass Ceramics, Zirconia, and everything in between is key. Saying that, yes we use dental cement in other spaces too-temporary restorative, endodontic sealers, and orthodontics bracket attachment to name a few For…

Cracked Tooth? Causes, Treatment & Repair

By David Rice | April 11, 2023

By: Dr. David Rice When it comes to cracked teeth, is there any truth to the old saying, “If it’s not broke, don’t fix it?” Likely not. Let’s take a closer look. Types of Cracked Teeth First, there are different types of cracked teeth. 1. Craze Lines There are very superficial cracks in teeth your…

Empowering Dental Teams: How To Inspire & Develop Leadership In Your Practice

By Dawn Patrick | April 10, 2023

By: Dawn Patrick In today’s shrinking workforce, many practice owners either struggle with high team turnover or haven’t recovered from practicing in a post-COVID world where many dental professionals did not return to the field. Practice owners and managers often ask themselves how to build a cohesive, long-term team of leaders.  Team members need to…

Two of My Teeth Hurt: Case Study

By Chad Duplantis, D.D.S, F.A.G.D | April 5, 2023

By: Dr. Chad Duplantis, D.D.S., F.A.G.D

Acquiring a Dental Practice   

By Bruce Bryen | April 3, 2023

By: Bruce Bryen When does the associate know that it’s the right time to acquire an operating dental practice? How does the associate figure out the process for its purchase, including the financing, legalities, and whether they are financially able to do so? How to Know When You Are Ready to Acquire a Dental Practice…

Dealing with a Dental Lesion, Now What!?

By Chad Duplantis, D.D.S, F.A.G.D | March 29, 2023

By: Dr. Chad Duplantis, D.D.S., F.A.G.D

Dental Bonding: How It Can Improve Your Smile

By David Rice | March 27, 2023

Dental bonding can be an excellent option when you want to improve your smile! By: Dr. David Rice When it comes to improving your smile, dental bonding is more popular today than it has ever been. Why? The beauty of bonding materials has radically improved over the last decade. It allows your dentist to remove…

7 Ways to Use ChatGPT for Dental Local SEO

By Sean Hamel | March 21, 2023

By: Sean Hamel By now you have likely heard of ChatGPT. This new AI tool has gained widespread attention for its remarkable language generation capabilities, which have been likened to the performance of a human writer. ChatGPT has its benefits but also its limitations. While the technology is evolving, it can provide some serious potential…