By: Lee Ann Brady DMD
Topic originally appeared on Pankey.org: Dr. Brady allowed permission for igniteDDS to share with our readers
Of all the methods commonly used for veneer provisionalization, my favorite has to be the shrink wrap technique. I love it and use it all the time because in my opinion, it is the easiest and most predictable method.
The term ‘shrink wrap’ comes from allowing polymerization shrinkage of the material to lock bisacryl onto the preparation. The main advantage of this approach is that it keeps veneer provisionals firmly secured until the final restoration can be placed.
Here’s my take on utilizing this technique in the dental practice:
Predictable Veneers with Shrink Wrap Provisionals
The first step of shrink wrap provisionals is to prepare the teeth.
Let’s imagine you are dealing with a patient who experienced trauma such as breaking their teeth in a bicycle accident.
Before beginning the technique, make sure you have all the diagnostic records you need, including all prep records for the lab: facebow, opposing model, final impressions (maybe more than one) with good flash, etc. Once you provisionalize the teeth, it won’t be easy to get access to the preps again.
One of the essential parts of a shrink wrap provisional technique is the fabrication of a silicone matrix with a silicone gasket to separate the excess.
You should begin with a solid model either of the teeth before they are prepared or of the wax-up. You can carve a 1 mm deep trench into the wax-up by using the cleoid end of a cleoid/discoid.
Put the sharp pointy end right on the free gingival margin of the gingival of the tooth on the model to carve. You can even go a little deeper in the interproximals. Now take that model and fabricate a two-stage silicone matrix.
First, create a putty matrix and trim it. Then, load the putty with the light body of the same impression system, reseat on the model, allow it to achieve a full set, and trim. Now you are ready to go to the patient and use lip retractors. Remember to add a little vaseline or lubricant to the lips for comfort.
At this point, I like to use the OptraGate from Ivoclar Vivadent for a latex-free retraction device that can handle anything in the anterior. I will have it in during preparation and for impressions so I don’t have to hold the lip out of the way.
In Conclusion
To delve deeper into mastering techniques like the shrink wrap provisionals, explore the array of courses and educational content that we offer at Pankey. Unleash the potential of your dentistry with expert guidance and resources.
Keep Reading: Cracking the Case: Understanding Broken Provisionals
